Tricks Of The Trade: Drying your grimy shoes
The past few days have been rainy. Today, I decided my shoes won't get dry by morning on their own. When I have to dry them, this is how I do it. I'm drying my bike shoes, but you can really dry any shoe this way, so long as they aren't susceptible to heat damage.
First, if they're really grimy, you might as well hose them off. Run them under the bathtub faucet, use the kitchen sink sprayer, or if you're married, I guess take them outside and use the garden hose. Failure to do so MAY result in a night sleeping on the couch. That's okay, it's kind of like camping.
Next, loosen the laces so that the tongue relaxes into the shoe for maximum air flow. Tie both laces together in a small knot near the end. Repeat with the other shoe.
Optional step: Remove the insole (if you can) and spray with febreeze or some other fabric freshener.
Next, hang the shoes on the inside of the dryer door, holding the knots at the top of the door with one hand, while closing the door with the other hand.

Voila! The shoes will hang in the dryer. They won't bounce around and get all beaten up, nor will they "kick" the dryer door open or make a lot of noise. Run the dryer on high. It might take longer to dry this way, but it's nicer on the shoes, nicer on the dryer, and a lot quieter.

Voila! The shoes will hang in the dryer. They won't bounce around and get all beaten up, nor will they "kick" the dryer door open or make a lot of noise. Run the dryer on high. It might take longer to dry this way, but it's nicer on the shoes, nicer on the dryer, and a lot quieter.
If you have cycling shoes that don't have laces (ratchet strap and/or velcro closure) you can hang them inside the door the same way with craftily-re-bent wire hangers, knots in some twine, or any other creative solution you can come up with. Using a dryer to dry shoes with plastic parts may cause deformities, so try this one at your own risk.
0 comments:
Post a Comment